3-24
Instruments and controls
function normally.
& High beam indicator
light
& SPORT mode indicator
This light shows that the headlights are in
the high beam mode.
This indicator light also illuminates when
the headlight flasher is operated.
light (AT models)
When the select lever is moved to the
manual gate, the SPORT mode is selected and the indicator light illuminates.
Refer to “SPORT mode” F7-20.
& Cruise control indicator light
& Select lever and gear position indicator (AT models)
Type B
This indicator shows the position of the
select lever.
When the manual mode is selected, the
gear position indicator (which shows the
current gear selection) and the upshift/
downshift indicator light up. Refer to
“Automatic transmission” F7-15.
& Turn signal indicator
lights
Type A
These lights show the operation of the turn
signal or lane change signal.
If the indicator lights do not blink or blink
rapidly, any of the turn signal light bulbs
may be burned out. Replace the bulb as
soon as possible. Refer to “Replacing
bulbs” F11-45.
This light illuminates when the “CRUISE”
main switch is pressed to activate the
cruise control function. For details, refer to
“To set cruise control” F7-32.
CAUTION
If the CHECK ENGINE warning light/
malfunction indicator light illuminates, the cruise control indicator
light flashes at the same time. At
this time, avoid driving at high
speed and have your vehicle inspected at a SUBARU dealer as
soon as possible.
NOTE
If you press the “CRUISE” main switch
button while turning the ignition switch
“ON”, the cruise control function is
deactivated and the cruise control