Keys and doors
ity reasons. It is recommended that you
have your dealer program all of your
transmitters into your system.
To replace the battery:
1)
1. Open the transmitter case using a flathead screwdriver.
2-11
Negative (−) side facing up
! Programming the transmitters
The keyless entry system is equipped with
a special code learning feature that allows
you to program new transmitter codes into
the system or to delete old ones. The
system can learn up to four unique
transmitter codes. The four transmitter
codes may be the same or different.
Programming transmitter codes into
system:
3. Replace with a new battery (type
CR2025 or equivalent) making sure to
install the new battery with the negative
(−) side facing up.
4. Refit the removed half of the transmitter case.
After the battery is replaced, the transmitter must be synchronized with the
keyless entry system’s control unit.
Press either the “ ” or “ ” button six
times to synchronize the unit.
& Replacing lost transmitters
2. Remove the old battery from the
holder.
Bag containing transmitter
If you lose a transmitter or want to
purchase additional transmitters (up to
four can be programmed), you should reprogram all of your transmitters for secur– CONTINUED –