Maintenance and service
11-49
3. Remove the bulb socket from the rear
combination light assembly by turning it
counterclockwise.
4. Pull the bulb out of the bulb socket and
replace it with a new one.
5. Set the bulb socket into the rear
combination light assembly and turn it
clockwise until it locks.
2. Slide the rear combination light assembly rearward and remove it from the
vehicle.
7. Tighten the upper and lower screws.
& License plate light
6. Put the rear combination light assembly into place while aligning the clip with
the guide on the vehicle.
1)
2)
3)
Brake/tail light
Rear turn signal light
Back-up light
1. Remove the mounting screws using a
Phillips screwdriver.
– CONTINUED –