7-32
Starting and operating
& Hill start assist warning light
Refer to “Hill start assist warning light (MT
models)” F3-21.
Cruise control
Cruise control enables you to maintain a
constant vehicle speed without holding
your foot on the accelerator pedal. It is
operative when the vehicle speed is 25
mph (40 km/h) or more.
control is not in use to avoid unintentionally setting the cruise control.
& To set cruise control
WARNING
Do not use the cruise control under
any of the following conditions. This
may cause loss of vehicle control.
. Driving up or down a steep grade
. Driving on slippery or winding
roads
. Driving in heavy traffic
. Towing a trailer
NOTE
. If you press the “CRUISE” main
switch button while turning the ignition
switch “ON”, the cruise control function is deactivated and the cruise
control indicator light flashes. To reactivate the cruise control function,
turn the ignition switch back to the
“Acc” or “LOCK” position, and then
turn it again to the “ON” position.
. Make sure the “CRUISE” main
switch is turned off when the cruise
1. Push the “CRUISE” main switch button.