2-8
Keys and doors
responsible for compliance
could void the user’s authority
to operate the equipment.
This device complies with Part 15 of
the FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including
interference that may cause undesired
operation.
equipment emitting strong radio waves
such as a power plant, broadcast station,
TV tower, or remote cont roller of home
electronic appliances.
The keyless entry system does not operate when the key is inserted in the ignition
switch.
Two transmitters are provided for your
vehicle.
The keyless entry system has the following functions.
. Locking and unlocking the doors and
rear gate without a key
. Unlocking the rear gate without a key
. Sounding a panic alarm
. Arming and disarming the alarm system. For detailed information, refer to
“Alarm system” F2-15.
The operable distance of the keyless entry
system is approximately 30 feet (10
meters). However, this distance will vary
depending on environmental conditions.
The system’s operable distance will be
shorter in areas near a facility or electronic
& Locking the doors
: Rear gate unlock button
: Unlock/disarm button
: Lock/arm button
A:
1)
2)
Panic button
Front
Back
Press the “ ” button to lock all doors and
the rear gate. An electronic chirp will
sound once and the turn signal lights will
flash once.
If any of the doors or the rear gate is not
fully closed, an electronic chirp will sound
five times and the turn signal lights will
flash five times to alert you that the doors
or the rear gate are not properly closed.
When you close the door, it will automatically lock and then an electronic chirp will
sound once and the turn signal lights will
flash once.