1-18
Seat, seatbelt and SRS airbags
2. After drawing out the seatbelt, pass it
through the belt guide.
6. Place the lap belt as low as possible
on your hips, not on your waist.
! Unfastening the seatbelt
3. After confirming that the webbing is not
twisted, insert the connector (tongue)
attached at the webbing end into the
buckle on the right-hand side until a click
is heard.
4. Insert the center seatbelt tongue plate
into the center seatbelt buckle marked
“CENTER” on the left-hand side until it
clicks.
Push the release button of the center
seatbelt buckle (on the left-hand side) to
unfasten the seatbelt.
If the belt stops before reaching the
buckle, return the belt slightly and pull it
out more slowly. If the belt still cannot be
unlocked, let the belt retract slightly after
giving it a strong pull, then pull it out slowly
again.
NOTE
When the seatback is folded down for
greater cargo area, it is necessary to
disconnect the connector.
5. To make the lap part tight, pull up on
the shoulder belt.