Subaru Forester Manuals 2011 Forester Owner’s Manual | Page 417

Specifications Wattage Bulb No. 1) High beam headlight 12V-60W 9005 (HB3) 2) Position light 12V-5W 168 (W5W) 3) Low beam headlight Models with HID light 12V-35W D2R Models with halogen light 12V-55W H11 4) Front side marker light 12V-5W 168 (W5W) 5) Map light 12V-8W – 6) Dome light 12V-8W – 7) Front fog light 12V-51W 9006 (HB4) 8) Front turn signal light 12V-21W (WY21W) 9) Door step light 10) Cargo area light 12V-5W 12V-13W – – 11) Brake/tail light 12) Rear turn signal light 12V-21/5W 12V-21W 7443 (W21/5W) (WY21W) 13) Back-up light 12V-21W 7440 14) Licence plate light 12V-5W 168 (W5W) A) High mount stop light – – B) Side turn signal light (if equipped) – – 12-15 WARNING . Bulbs may become very hot while illuminated. Before replacing bulbs, turn off the bulbs and wait until the bulbs cool down. Otherwise, there is a risk of sustaining a burn injury. . For models with HID low beam headlights, observe the following precautions. Not doing so carries the risk of an electric shock that could result in serious injury because the HID bulbs use an extremely high voltage. – Do not replace any headlight bulbs (both low beam and high beam) by yourself. – Do not remove/restore the headlight assemblies by yourself. – Do not remove any headlightassembly components by yourself. For replacement, contact your SUBARU dealer. – CONTINUED –