Keys and doors
& Power window operation by
passengers
& Initialization of power window (type A)
Each passenger window can be controlled
by the power window switch located on
the door.
2-23
If the vehicle’s battery is disconnected due
to situations such as battery or fuse
replacement, the following functions are
deactivated.
. One-touch auto up/down function
. Anti-entrapment function
To open:
Push the switch down and hold it until the
window reaches the desired position.
To close:
Pull the switch up and hold it until the
window reaches the desired position.
Initialize the power window in the following
procedure to reactivate such functions.
1. Close the driver’s door.
2. Turn the ignition switch to the “ON”
position.
3. Open the driver’s side window halfway
by pushing down the power window
switch.
4. Pull up the power window switch and
close the window completely. Continue
pulling up the switch for approximately 1
second after the window is closed completely.
Rear gate
The rear gate can be locked and unlocked
using any of the following systems.
. Power door locking switch: Refer to
“Power door locking switches” F2-6.
. Remote keyless entry system: Refer to
“Remote keyless entry system” F2-7.
To open:
Unlock the rear gate and push the rear
gate opener button to open the rear gate.
When the lock switch on the power
window switch cluster, located on the
driver’s side door, is in the “LOCK”
position, the passengers’ windows cannot
be operated with the passengers’
switches.
– CONTINUED –