Keys and doors
head screwdriver.
CR2025 or equivalent) making sure to
install the new battery with the negative
(−) side facing up.
4. Refit the removed half of the transmitter case.
2-11
Programming transmitter codes into
system:
After the battery is replaced, the transmitter must be synchronized with the
keyless entry system’s control unit.
Press either the “ ” or “ ” button six
times to synchronize the unit.
& Replacing lost transmitters
2. Remove the old battery from the
holder.
If you lose a transmitter or want to
purchase additional transmitters (up to
four can be programmed), you should reprogram all of your transmitters for security reasons. It is recommended that you
have your dealer program all of your
transmitters into your system.
Bag containing transmitter
! Programming the transmitters
The keyless entry system is equipped with
a special code learning feature that allows
you to program new transmitter codes into
the system or to delete old ones. The
system can learn up to four unique
transmitter codes. The four transmitter
codes may be the same or different.
1)
Negative (−) side facing up
3. Replace with a new battery (type
Transmitter circuit board
To register a new transmitter with the
keyless entry system, it is necessary to
– CONTINUED –