11-14
Maintenance and service
room to add genuine SUBARU cooling
system conditioner in the radiator. Add
genuine SUBARU cooling system conditioner until the coolant level reaches the
filler neck. Do not pour the coolant too
quickly, as this may lead to insufficient air
bleeding and trapped air in the system.
2. Place a proper container under
drain plug and loosen the drain plug.
3. Loosen the radiator cap to drain
coolant from the radiator. Then drain
coolant from the reserve tank. Tighten
drain plug securely.
the
Non-turbo models
1) Fill up to this level
the
the
the
NOTE (turbo models only)
The cap (without tabs) on top of the
radiator does not need to be removed.
To add coolant, remove the cap (with
tabs) on the coolant tank on top of the
engine.
4. Install the under cover.
Turbo models
1) Fill up to this level
5. Slowly pour the coolant and fill up to
just below the filler neck, allow