11-8
Maintenance and service
Engine oil
& Checking the oil level
NOTE
Check the engine oil level at each fuel
stop.
1. Park the vehicle on a level surface and
stop the engine.
. The engine oil consumption rate is
not stabilized, and therefore cannot be
determined until the vehicle has traveled at least several thousand miles
(kilometers). Even after break-in, when
the vehicle is used under severe driving conditions such as those mentioned in the Warranty and Maintenance Booklet, engine oil is consumed
or deteriorated more quickly than under normal driving conditions. If you
drive your vehicle under these severe
conditions, you should check the oil
level at least at every second fuel fill-up
time, and change the oil more frequently. Please refer to the Warranty
and Maintenance Booklet for more details.
. If the oil consumption rate seems
abnormally high after the break-in
period, for example more than 1 quart
per 1,200 miles or 1 liter per 2,000
kilometers, contact your SUBARU dealer.
1)
2)
3)
2. Pull out the level gauge that has the
“
” symbol on top, wipe it clean, and
insert it again.
3. Be sure the level gauge is correctly
inserted until it stops.
Notch
Upper level
Lower level
4. Pull out the level gauge again and
check the oil level on it. If it is below the
lower level, add oil to bring the level up to
the upper level.
CAUTION
. Use only engine oil with the
recommended grade and viscosity.
. Be careful not to spill engine oil
when adding it. If oil touches the
exhaust pipe, it may cause a bad
smell, smoke, and/or a fire. If
engine oil gets on the exhaust