Starting and operating
! To decrease the speed (by brake
pedal)
1. Depress the brake pedal to release
cruise control temporarily.
2. When the speed decreases to the
desired speed, press the “SET/COAST”
button once. Now the desired speed is set
and the vehicle will keep running at that
speed without depressing the accelerator
pedal.
& Cruise control indicator light
NOTE
. If you press the “CRUISE” main
switch button while turning the ignition
switch “ON”, the cruise control function is deactivated and the cruise
control indicator light flashes. To reactivate the cruise control function,
turn the ignition switch back to the
“Acc” or “LOCK” position, and then
turn it again to the “ON” position.
. If this indicator light and the CHECK
ENGINE warning light/malfunction indicator lamp flash simultaneously during driving, have the vehicle checked
by your nearest SUBARU dealer.
7-39
& Cruise control set indicator
light
The cruise control set indicator light
illuminates when the ignition switch is
turned to the “ON” position and turns off
after approximately 3 seconds.
The light illuminates when vehicle speed
has been set.
The cruise control indicator light illuminates when the ignition switch is turned to
the “ON” position and turns off after
approximately 3 seconds.
The light illuminates when the “CRUISE”
main switch is pressed.