7-22
Starting and operating
& Shift lock release
If the selector lever does not move from
the “P” position with the brake pedal
depressed and the ignition switch in the
“ON” position, perform the following steps.
To override the shift lock:
1. Set the parking brake and stop the
engine.
2. Take out the screwdriver from the tool
bag.
When selected, the SPORT mode indicator light on the combination meter will turn
on.
To deselect SPORT mode, move the
selector lever to the “D” position or select
manual mode.
To subsequently reselect SPORT mode,
move the selector lever to the “D” position
and from there to the manual gate.
In this mode, the transmission shifts up at
higher vehicle speeds and shifts down
more responsively than in normal mode.
4. Insert the screwdriver into the hole.
5. Push down on the screwdriver and
move the selector lever from the “P” to the
“N” position.
6. Remove the screwdriver from the hole.
Depress the brake pedal and start the
engine.
Take your vehicle to the nearest SUBARU
dealer immediately to have the system
repaired.
3. Remove the cover by prying on the
edge with a flat-head screwdriver.