Subaru Forester Manuals 2010 Forester Navigation System Manual | Page 112

Basic operation of the Audio and Visual Setting and adjusting the sound Adjusting the sound volume Turning off the sound It is possible to adjust the sound volume while looking and listening to the source. It is possible to mute temporarily. NOTE When the voice of the navigation system breaks in, the sound volume is automatically reduced temporarily. 1 Rotate the [POWER/VOL] button in either direction or press the [+][-] switches of the steering switch. • Turning the [POWER/VOL] button counterclockwise decreases the sound volume while turning it clockwise increases the sound volume. • Each time the [-] button of the steering switch is pressed, the sound volume decreases, and each time the [+] button is pressed, it increases. • The volume level is displayed in figures on the upper right section of the screen. NOTE For detailed setting of the sound quality and balance, refer to "Setting the audio" on Page 158. 110 Audio and Visual 1 Press the (mute) switch of the steering switch. Press again the (mute) switch of the steering switch or adjust the sound volume to cancel the mute. NOTE (mute) switch while in the use of the hands• When pressing the free function, the audio sound volume turns off automatically and the following operations are available. (mute) switch while in the incoming call with the • Pressing the handsfree allows you to take a phone call. • Pressing the switch continuously for more than 0.5 seconds while in the incoming call with the handsfree allows you to put a phone call on hold. • While in the incoming call with the handsfree, pressing the switch continuously for more than 0.5 seconds with a phone call put on hold allows you to hang up the phone. • For details of the sound volume adjustment, refer to "Adjusting the sound volume" on Page 110.