Child Restraint Systems 71 |
For details, refer to“ Tether Anchorages” FP73. |
Each lower anchorage is located behind the cover of seatback bottom. |
|||||
|
! To install a child restraint system using lower and tether anchorages s01ag070103
WARNING
Before installing a child restraint system, be sure to confirm that the seatback is securely locked into place. Otherwise, in an accident, serious injury or death could result.
1. Move the seatback back and forth to confirm that it is securely locked into place. – Check that the red colored unlocking marker on the lock release knob is not visible. For details, refer to“ Folding Down the Rear Seatback” FP35.
|
U. S.-spec. models |
CAUTION
When you install a child restraint system, follow the manufacturer’ s instructions supplied with it. After installing the child restraint system, check to ensure that it is held securely in position. If it is not held tight and secure, the danger of your child suffering personal injury in the event of an accident may be increased.
|
1
Seat, Seatbelt and SRS Airbags
|
|||
|
Canada-spec. models
2. You will find“” marks at the bottoms of the rear seatback. These marks indicate the positions of the lower anchorages.
|
||||||
Peel off the anchorage cover completely from the selected side of the rear seatback to expose the lower anchorages to be used for installation of the child restraint system. |
||||||
– CONTINUED – |