44
Seatbelts
5. To tighten the lap part, pull up on the shoulder belt.
6. Place the lap belt as low as possible on the hips, not on the waist.
! Adjusting the front seat shoulder belt anchor height s01ae060101
Adjust the shoulder belt anchor height to the position best suited for the driver / front passenger. Always adjust the anchor height so that the shoulder belt passes over the middle of the shoulder without touching the neck.
To raise:
Pull the release knob and slide the anchor up.
To lower:
Pull the release knob and slide the anchor down.
Pull down on the anchor to make sure that it is locked in place.
WARNING
When wearing the seatbelts, make sure the shoulder portion of the webbing does not pass over your neck. If it does, adjust the seatbelt anchor to a lower position. Placing the shoulder belt over the neck may result in neck injury during sudden braking or in a collision.
! Unfastening the seatbelt
1 Button s01ae060102
1. Push the button on the buckle.
2. Retract the seatbelt slowly to prevent it from getting tangled or twisted.