|
tenance or other purposes). This difficulty is caused by the electronically controlled throttle’ s self-diagnosis function. To overcome it, keep the ignition switch in the“ ON” position for approximately 10 seconds before starting the engine.. After the engine starts, the engine speed will be kept high.
. Do not shift the select lever while the engine starter is cranking.
1 Operation indicator 2 Push-button ignition switch
When the push-button ignition switch is pressed while depressing the brake pedal, the engine will start. The starting procedure for the engine is as follows.
1. Carry the access key fob, and sit in the driver’ s seat.
|
2. Make sure the parking brake is applied.
3. Make sure the select lever is in the“ P” position. The engine can also start when the select lever is in the“ N” position, however, for safety reasons, start in the“ P” position.
4. Depress the brake pedal until the operation indicator on the push-button ignition switch turns green. When starting with the select lever in the“ N” position, the indicator does not turn green.
5. While depressing the brake pedal, press the push-button ignition switch.
NOTE
While pressing the select lever button in, the indicator on the push-button ignition switch will not turn green even when the select lever is in the“ P” position.
|
& Automatic Vehicle Shut Down Function s07be10
WARNING
. The cooling function operates only when the engine is running.
. Do not leave children or adults who would normally require the support of others alone in your vehicle. Pets should not be left alone either. On hot, sunny days, temperatures in a closed vehicle could quickly become high enough to cause severe or possibly fatal injuries to people or animals.
This vehicle has a function to automatically stop the engine if it is left in the following state for about 30 minutes while the engine is running.
. The select lever is in the“ P” position.. The vehicle is stopped.
|
If the engine stops automatically, the ignition switch turns to the“ OFF” position.
! How to reset the timer of the Automatic Vehicle Shut Down function s07be1001
If you want to continue running the engine, you can reset the timer of the Automatic
|
7
Starting and Operating
|
– CONTINUED – |