Center Information Display( CID) 191 |
|||||
|
refer to“ General settings” FP200( 11.6-inch display models) or“ General settings” FP216( dual 7.0-inch display models). For details about unit settings, refer to“ Car settings” FP204( 11.6-inch display models) or“ Vehicle setting icons” FP222( dual 7.0-inch display models).
. The images displayed in this Owner’ s Manual are sample images. The actual image may vary depending on the region and vehicle specifications.
& Welcome Screen s03bs02
Welcome screen and good-bye screen are motion graphic displayed on the combination meter display and center information display upon entering and exiting the vehicle.
When the driver’ s door is opened and closed, the welcome screen will appear for a short time.
NOTE
. The welcome screen will disappear when the ignition switch is turned to the“ ON” position while the welcome screen is shown.
|
. The welcome screen can be turned on or off. For details, refer to“ General settings” FP200( 11.6-inch display models) or“ General settings” FP216( dual 7.0-inch display models).
. For a certain period of time after the welcome screen has once appeared, it may not appear again even when the driver’ s door is opened and closed. This does not indicate a malfunction.
& Good-Bye Screen s03bs08
The good-bye screen will be displayed under the following conditions.
. The driver’ s door is opened after the ignition switch is put in the“ OFF” position.
. 3 minutes have passed after the ignition switch is put in the“ OFF” position with the driver’ s door closed.
. 10 minutes have passed when the hands-free phone is used after the ignition switch is put in the“ OFF” position.
. The battery voltage is low when the ignition switch is put in the“ OFF” position.
|
& Interruption Screen s03bs03
Useful messages, such as reminders, weather information( if equipped) and traffic information( if equipped) may interrupt the current screen and appear on the display accompanied by a beep. Take the proper action according to the message.
& Touch Screen Operations s03bs04
The center information display has a touch screen. Operations are performed by touching the touch screen directly.
! Touch
Quickly touch and release once.
s03bs0401
|
3
Instruments and Controls
|
||
– CONTINUED – |