|
window switches cannot be operated.
When the indicator on the window switches does not illuminate, the window switch cannot be operated.
|
2-9. Rear Gate
CAUTION
|
s02aj |
Opening the rear gate: |
|
& Initialization of Power Window( Windows with One- Touch Auto Up and Down Function) s02ah06
If the one-touch auto up and down function or off delay function does not operate properly, operate each window according to the following procedure in order to initialize the power window system.
1. Close the door.
2. Turn the ignition switch to the“ ON” position.
3. Open the window completely and then press and hold down the power window switch for approximately 1 second.
4. Close the window completely and then pull and hold the power window switch for approximately 1 second.
|
When loading and unloading cargo, be careful not to come in contact with the hot engine exhaust gas or the exhaust pipe, because they could burn you.
NOTE
Avoid keeping the rear gate open for more than a few hours. Doing so may drain the vehicle battery.
The rear gate can be locked and unlocked using any of the following systems.
. Power door locking switch: Refer to“ Locking and Unlocking from the Inside” FP132.
. Keyless access with the push-button start system: Refer to“ Keyless Access with Push-Button Start System” FP110.
. Remote keyless entry system: Refer to“ Remote Keyless Entry System” FP126.
|
Rear gate opener button
1. Open the rear gate using the appropriate method.
When the rear gate is locked
When the rear gate is unlocked
Models with the access key
Press and hold the rear gate opener button while carrying the access key.
Models without the access key
Unlock the rear gate, and then press and hold the rear gate opener button.
Press and hold the rear gate opener button.
2. Hold the rear gate and lift it up slowly.
|
2
Keys and Doors
|
||
– CONTINUED – |