Door Locks 133 |
||||||
|
& Automatic Door Locking / Unlocking s02ac08
All the doors( including the fuel filler lid) are automatically locked or unlocked under the following conditions.
. For automatic door locking
– When the vehicle speed reaches 12 mph( 20 km / h) or higher( factory default setting).
– When the select lever is shifted into a position other than the“ P” position.
. For automatic door unlocking – When the driver’ s door is open
( factory default setting). – When the ignition switch is turned to
OFF. – When the select lever is shifted into the“ P” position.
NOTE
. The automatic door lock and unlock setting can be changed with the center information display. Refer to“ Car settings” FP204( 11.6-inch display models) or“ Vehicle setting icons” FP222( dual 7.0-inch display models).
. When locking the door by the power door locking switches, automatic door locking will not operate.
|
. When unlocking the door by the power door locking switches, automatic door unlocking will not operate.
. If the system detects a strong enough impact to deploy the airbags, all doors may be automatically unlocked. For further details, refer to“ Automatic Door Locking / Unlocking Operation When Involved in an Accident” FP451.
. When getting out of the vehicle from a rear door, make sure to unlock all the doors by pushing the unlock side of the power door locking switch. If a rear door is unlocked from the inside door lever then the door is opened and closed, the Key lock-in prevention function will be triggered. All doors will be unlocked, the Key lock-in prevention warning indicator“” will appear and the warning chime will also sound.
|
& Key Lock-In Prevention Function s02ac06
Under the following conditions, all the doors will not lock when the power door locking switch is pushed with the driver’ s door open.
. The key is still in the ignition switch( models without“ keyless access with
|
push-button start system”).
. The ignition switch is in the“ ACC” or“ ON” position( models with“ keyless access with push-button start system”).
NOTE
. When leaving the vehicle, make sure you are holding the key before locking the doors.
. When getting out of the vehicle from a rear door, make sure to unlock all the doors by pushing the unlock side of the power door locking switch.
. When getting out of the vehicle from a rear door, make sure to unlock all the doors by pushing the unlock side of the power door locking switch. If a rear door is unlocked from the inside door lever then the door is opened and closed, the Key lock-in prevention function will be triggered. All doors will be unlocked, the Key lock-in prevention warning indicator“” will appear and the warning chime will also sound.
. The factory setting( default setting) for this function is set as“ operational”. This function’ s operational / non-operational setting can be changed by a SUBARU dealer. Contact a SUBARU dealer for details.
|
– CONTINUED – |
2
Keys and Doors
|