Adaptive Cruise Control
How to use Adaptive Cruise Control
■ Setting Adaptive Cruise Control
1. Setting Adaptive Cruise Control to standby status Press the( CRUISE) switch. At this time,( Adaptive Cruise Control indicator)( white), your vehicle indicator and the following distance setting indicator are displayed on the combination meter display. The set vehicle speed display will read“--- MPH(--- km / h)”.
( 1)
( 2)
H00530
H01811
( 1) Following distance setting indicator( 2) Adaptive Cruise Control indicator
( white)
To set the ready status: When all of the following conditions are met,( READY indicator) is displayed on the combination meter display, and Adaptive Cruise Control can be activated.- All doors( except the rear gate) are closed.- The driver’ s seatbelt is fastened.- The electronic parking brake is not( 1) applied. The electronic parking brake
H01812 indicator light is off.- The select lever is in the“ D” or“ M”( 1) READY indicator position.- The brake pedal is not depressed while driving or the brake pedal is strongly depressed while stopping.
75