Child Restraint Systems 71 |
! To hook the tether |
s01ag0902 |
seatbelt” FP44. |
||
CAUTION |
||||
|
. Except for the center seating position, remove the head restraint when mounting a child restraint system. Otherwise, it might be possible that the tether anchorage cannot be fastened tightly.
. Store the head restraint that has been removed in the cargo area. Do not place the head restraint in the passenger compartment to prevent it from being thrown around in the passenger compartment in a sudden stop or a sharp turn.
. For the center seating position, raise the center head restraint to the extended position when mounting a child restraint system. Otherwise, it will be impossible to use the seatbelt guide that is attached to the head restraint correctly.
The seatbelt guide is essential for routing the belt webbing at the center seating position. For information about using the seatbelt guide, refer to“ Rear center
|
1. Attach the tether strap to the appropriate tether anchorage. For the center seating position, route the tether strap under the head restraint as illustrated below. |
1 Seatbelt guide 2 Seatbelt of the center seating position 3 Tether strap
2. Tighten the tether strap securely.
SUBARU recommends that you check with a certified Child Passenger Safety Technician to ensure the proper installation of your child restraint system. For more information, and to locate the closest inspection location in the U. S., refer to the National Highway Traffic Safety Administration( NHTSA) website. In Canada, check with Transport Canada.
|
1
Seat, Seatbelt and SRS Airbags
|
||||||