68
Child Restraint Systems
For details , refer to “ Tether Anchorages ” FP70 .
! To install a child restraint system using lower and tether anchorages s01ag070103
WARNING
Before installing a child restraint system , be sure to confirm that the seatback is securely locked into place . Otherwise , in an accident , serious injury or death could result .
1 . Move the seatback back and forth to confirm that it is securely locked into place . – Check that the red colored unlocking marker on the lock release knob is not visible . For details , refer to “ Folding Down the Rear Seatback ” FP35 .
U . S . -spec . models
Each lower anchorage is located behind the cover of seatback bottom .
CAUTION
When you install a child restraint system , follow the manufacturer ’ s instructions supplied with it . After installing the child restraint system , check to ensure that it is held securely in position . If it is not held tight and secure , the danger of your child suffering personal injury in the event of an accident may be increased .
Canada-spec . models
2 . You will find “ ” marks at the bottoms of the rear seatback . These marks indicate the positions of the lower anchorages .
Peel off the anchorage cover completely from the selected side of the rear seatback to expose the lower anchorages to be used for installation of the child restraint system .