Function Settings 515
12-4. Function Settings s12ag
& Function Settings and Adjustments on the Center Information Display s12ag01
Setting adjustments can be manually changed within the center information display to meet your personal requirements. Refer to“ Center Information Display( CID)” FP186.
& Individual Settings and Adjustments Excluding Center Information Display s12ag02
For setting adjustments to the following items, refer to the appropriate page for details.
Item |
Function |
Available settings |
Factory default setting |
Page |
Alarm system |
Alarm system |
Operation / Non-operation |
Operation |
133 |
Remote keyless entry system |
Audible signal |
Operation / Non-operation |
Operation |
124 |
& Function Settings and Adjustments Performed by a Dealer s12ag03
Item Function Available settings Factory default setting
Alarm system |
Monitoring start delay time( after closing doors)
Map lights / Dome light / Cargo area light illumination
|
0 seconds / 30 seconds
ON / OFF
|
30 seconds
OFF
|
Keyless access with push-button |
Audible signal volume * |
Level 1 to 7 |
Level 6 |
Remote keyless entry system |
Audible signal volume * |
Level 1 to 7 |
Level 6 |
Key lock-in prevention |
Key lock-in prevention |
Operation / Non-operation |
Operation |
Auto dimmer cancel
Sensitivity of the operation of the auto dimmer cancel
OFF / Min / Low / Mid / Hi / Max
High beam assist function High beam assist function Operation / Non-operation Operation Reverse gear interlocked rear wiper
Reverse gear interlocked rear wiper operation Operation / Non-operation
Mid
U. S.-spec. models: Non-operation Other models: Operation
Specifications
12
*: The audible signal volume cannot be set under level 5 for the warning chime.