Seatbelts 43 |
|||||||||
! Adjusting the front seat shoulder belt anchor height s01ae060101 |
Adjust the shoulder belt anchor height to the position best suited for the driver / front passenger . Always adjust the anchor height so that the shoulder belt passes over the middle of the shoulder without touching the neck . |
WARNING
When wearing the seatbelts , make sure the shoulder portion of the webbing does not pass over your neck . If it does , adjust the seatbelt anchor to a lower position . Placing the shoulder belt over the neck may result in neck injury during sudden braking or in a collision .
! Unfastening the seatbelt
s01ae060102
|
Before closing the door , make sure that the belts are retracted properly to avoid catching the belt webbing in the door .
! Rear seatbelts ( except rear center seatbelt ) s01ae0602
1 . Sit well back in the seat .
2 . Pick up the tongue plate and pull the belt out slowly . Do not let it get twisted . . If the belt stops before reaching the buckle , return the belt slightly and pull it out more slowly .
. If the belt still cannot be unlocked , let the belt retract slightly after giving a strong pull on it , then pull it out slowly again .
|
1
Seat , Seatbelt and SRS Airbags
|
|||||
|
To raise :
Pull the release knob and slide the anchor up .
To lower :
Pull the release knob and slide the anchor down .
Pull down on the anchor to make sure that it is locked in place .
|
1 Button
1 . Push the button on the buckle .
2 . Retract the seatbelt slowly to prevent it from getting tangled or twisted .
|
3 . Insert the tongue plate into the buckle until you hear a click . |
|||||||
– CONTINUED – |