CAUTION |
||||
Never use engine coolant as washer fluid because it could cause paint damage. |
||||
|
Windshield washer fluid warning light
When there is only a small amount of washer fluid remaining, the windshield washer fluid warning light will appear. When this occurs, refill the washer fluid as follows.
|
1“ FULL” mark
Remove the washer tank filler cap, then add fluid until it reaches the“ FULL” mark on the tank.
Use windshield washer fluid. If windshield washer fluid is unavailable use clean
|
If you fill the windshield washer tank with a fluid with a different concentration from the one used previously, purge the old fluid from the piping between the windshield washer tank and washer nozzles by operating the washer for a certain period of time. Otherwise, if the concentration of the fluid remaining in the piping is too low for the outside temperature, it may freeze and block the nozzles.
CAUTION
. Adjust the washer fluid concentration appropriately for the outside temperature. If the concentration is inappropriate, sprayed washer fluid may freeze on the windshield and obstruct your view, and the fluid may freeze in the windshield washer tank.
|
Maintenance and Service
11
|
|
– CONTINUED – |