|
& Switching Power Status s09ap02
1. Apply the parking brake.
2. Place the select lever in the“ P” position.
3. Depress the brake pedal.
4. Hold the access key fob with the buttons facing you, and touch the push-button ignition switch with it. When the communication between the access key fob and the vehicle is completed, a chime( ding) will sound. At the same time, the status of the push-button ignition switch changes to either of the following.. When the keyless access with pushbutton start system is deactivated:“ ACC”
. Under other conditions:“ ON”
|
5. When the keyless access with pushbutton start system is deactivated, press the push-button ignition switch with the brake pedal released. The status of the push-button ignition switch then changes to“ ON”.
NOTE
If the power does not switch even though the above procedure was followed precisely, contact your SUBARU dealer.
& Starting Engine s09ap03
1. Apply the parking brake.
2. Place the select lever in the“ P” position.
3. Depress the brake pedal.
|
4. Hold the access key fob with the buttons facing you, and touch the push-button ignition switch with it. When the communication between the access key fob and the vehicle is completed, a chime( ding) will sound. At the same time, the push-button ignition switch turns to the“ ACC” or“ ON” position.
5. After the push-button ignition switch turns to the“ ACC” or“ ON” position, while depressing the brake pedal, press the push-button ignition switch.
NOTE
If the engine does not start even though the above procedure was followed precisely, contact your SUBARU dealer.
|
In Case of Emergency
9
|