436
Engine Overheating
vehicle that has the discharged battery.
6. When finished, carefully disconnect the cables in exactly the reverse order.
9-6. Engine Overheating
WARNING s09ae
Never remove the radiator cap until the engine has been shut off and has fully cooled down. When the engine is hot, the coolant is under pressure. Removing the cap while the engine is still hot could release a spray of boiling hot coolant, which could burn you very seriously.
CAUTION
If the engine overheats, the engine speed or the vehicle speed may be reduced. Stop the vehicle in a safe place immediately.
& If Steam Is Coming from the Engine Compartment s09ae01
Turn off the engine and get everyone away from the vehicle until it cools down.
& If No Steam Is Coming from the Engine Compartment s09ae02
NOTE
For details about how to check the coolant level or how to add coolant, refer to“ Engine Coolant” FP470.
1. Keep the engine running at idling speed.
2. Open the hood to ventilate the engine compartment. Refer to“ Engine Hood” FP464.
3. Confirm that the cooling fan is turning. If the fan is not turning, immediately turn off the engine and contact your authorized dealer for repair.
4. After the engine coolant temperature has dropped, turn off the engine. If the temperature gauge stays in the overheated zone, turn off the engine.
5. After the engine has fully cooled down, check the coolant level in the reserve tank. If the coolant level is below the“ LOW” mark, add coolant up to the“ FULL” mark.
6. If there is no coolant in the reserve tank, add coolant to the reserve tank. Then remove the radiator cap and fill the radiator with coolant.