Seat Heater 33 |
||||||||||
! Head restraint height adjustment s01aa0401 |
1 Head restraint 2 Release button
To raise : Pull the head restraint up . To lower :
Push the head restraint down while pressing the release button on the top of the seatback .
To remove :
While pressing the release button , pull out the head restraint .
To install :
Install the head restraint into the holes that are located on the top of the seatback until the head restraint locks . Press and hold the release button to lower the head restraint .
|
Each head restraint should be adjusted so that the center of the head restraint is closest to the top of the occupant ’ s ears .
NOTE
It is not possible to remove or install the head restraint without reclining the front seatback . Reclining the front seatback and then remove or install the head restraint .
|
1-2 . Seat Heater ( If Equipped )
s01ab
The seat heater is equipped in the front seats .
The seat heater operates when the ignition switch is either in the “ ACC ” or “ ON ” position .
CAUTION
. Do not put hard or heavy objects or ones with protrusions on the seat , and do not stab the seat with sharp objects , such as pins or needles .
. People with delicate skin may suffer slight burns even at low temperatures if they use the seat heater for a long period of time . When using the heater , always be sure to warn the persons concerned .
. Do not put anything on the seat which insulates against heat , such as a blanket , cushion , or similar items . This may cause the seat heater to overheat .
. When the seat is warmed enough or before you leave the vehicle , be sure to turn off the seat heater .
|
1
Seat , Seatbelt and SRS Airbags
|
||||||
– CONTINUED – |