382
Reverse Automatic Braking( RAB) System
again. If the setting cannot be changed even after turning the ignition switch to the“ ON” position again, we recommend that you consult your SUBARU dealer.
. As soon as you turn off the ignition switch, the Reverse Automatic Braking( RAB) ON / OFF setting is stored in the system. Therefore, when you turn the ignition switch from the“ OFF” state to the“ ON” position, the Reverse Automatic Braking( RAB) setting will revert to the state that was set before the ignition switch was turned off.
. When you turn the ignition switch off, the Sonar Audible Alarm ON / OFF settings will always reset, and the system will not store the settings of the function. Therefore, every time you turn the ignition switch to the“ ON” position, the Sonar Audible Alarm will turn on automatically.
Also, the following settings can be changed by operating the center information display.
. Warning volume. Sonar Audible Alarm
For details, refer to“ Car settings” FP202.
& RAB Warning Indicator
1 RAB malfunction message 2 RAB warning indicator s07bn07
If the Reverse Automatic Braking( RAB) system malfunctions, the above indicator illuminates on the combination meter. Contact the nearest SUBARU dealer for details.
& Handling of the Sonar Sensors s07bn06
The 4 sonar sensors are located in the rear bumper. To ensure the proper operation of the Reverse Automatic Braking( RAB) system, observe the following precautions.
. Do not affix any stickers or other items on the sonar sensor or the rear bumper surface.
. Always keep the sonar sensor and the rear bumper surface clean.
. Do not modify rear bumper.. Do not paint the rear bumper.
. Do not apply high pressure water to the sonar sensors with a high pressure carwashing machine.
. Do not apply strong impacts to the rear bumper. If a sensor becomes misaligned, a system malfunction may occur, including inability to detect objects in the reversing direction. If any strong impact is applied to the rear bumper, contact a SUBARU dealer to have the system inspected.