Parking Your Vehicle 347 |
|||
|
Electronic parking brake indicator light
When the parking brake is applied while the ignition switch is in the“ ON” position, the following indicator lights illuminate.
. The indicator light on the parking brake switch
. The electronic parking brake indicator light on the combination meter( for details, refer to“ Electronic Parking Brake Indicator Light” FP164.)
NOTE
. The parking brake will not be released under the following conditions even if the parking brake switch is pressed. – The ignition switch is in the“ ACC” or“ LOCK”/“ OFF” position.
|
– The brake pedal is not depressed.
. The electronic parking brake system uses motors to apply the parking brake. Therefore, operating sounds from the motors will be heard when applying or releasing the parking brake. Make sure that the motor sounds are heard when applying or releasing the parking brake.
. When the electronic parking brake system has a malfunction or the electronic parking brake operation is prohibited temporarily, if the parking brake switch is operated, a chirp sound is heard and the electronic parking brake indicator light flashes.
. When you cannot release the parking brake due to, for example, a system malfunction, contact your SUBARU dealer and have your SUBARU dealer release the parking brake.
. If the operation of the electronic parking brake switch is stopped midway or performed extremely slowly, the system may detect an error and turn on the brake system warning light. However, this does not indicate a malfunction if the warning light turns off after operating the switch.
|
. When the electronic parking brake has not been used for a long period of time, the electronic parking brake may operate automatically after the ignition switch is turned to the“ LOCK”/“ OFF” position. This occurs due to checking the proper operation of the electronic parking brake and does not indicate a malfunction.
. If the electronic parking brake switch is malfunctioning and the electronic parking brake cannot be released, refer to the instructions described in“ Automatic release function by accelerator pedal” FP348.
. After activating the electronic parking brake, you may hear a short sound several minutes after the electronic parking brake indicator light and the indicator light on the electronic parking brake switch illuminate as the system confirms proper engagement. This sound is different from the apply and release sound. This can occur: – If the brakes are extremely hot. – If the car is parked on a steep incline. – If the electronic parking brake is
|
7
Starting and Operating
|
– CONTINUED – |