Subaru Crosstrek Manuals 2025 Crosstrek Owner's Manual | Page 323

Starting and Stopping Engine( Models with Push-Button Start System) 315
& Stopping the Engine s07bd02
The ignition switch should be turned off only when the vehicle is stopped and the engine is idling.
WARNING
Do not stop the engine when the vehicle is moving. This will cause loss of power to the power steering and the brake booster, making steering and braking more difficult. It could also result in accidental activation of the“ LOCK” position on the ignition switch, causing the steering wheel to lock.
1. Stop the vehicle completely.
2. Move the select lever to the“ P” position.
3. Turn the ignition switch to the“ LOCK / OFF” position.
The engine will stop, and the power will be switched off.
& Steering Lock s07bd07
After stopping the engine and the key is removed from ignition switch, the steering wheel will be locked due to the steering lock function.
When the engine is restarted, the steering lock will be automatically released.
! When the steering lock cannot be released s07bd0701
When you cannot unlock the steering wheel, perform the following steps.
1. Check that the parking brake is applied.
2. Turn off unnecessary lights and accessories.
3. Check that the select lever is set in the“ P” position.
4. Depress the brake pedal and keep it depressed.
5. Turn the ignition switch to the“ ON” position while turning the steering wheel left and right.
If you cannot unlock the steering wheel by doing the steps, consult your nearest SUBARU dealer.
7-5. Starting and Stopping Engine( Models with Push- Button Start System)
s07be
& Safety Precautions s07be06
Refer to“ Safety Precautions” FP107.
& Operating Range for Push- Button Start System s07be01
Refer to“ Operating Range for Push- Button Start System” FP148.
& Starting Engine
WARNING
s07be03
. There are some general precautions when starting the engine. Carefully read the precautions described in“ General Precautions When Starting / Stopping Engine” FP313.
. If the indicator on the push-button ignition switch flashes in green after the engine has started, never drive the vehicle. The steering is still locked, and it may result in an accident.
7
Starting and Operating
– CONTINUED –