Center Information Display ( CID ) 213 |
|||||||
|
3 Upper main screen ( Refer to “ Setting of the upper display ” FP214 .)
4 Lower main screen ( Refer to “ Setting of the lower display ” FP217 .)
5 Climate control screen ( Refer to “ Climate control screen ” FP213 .)
While the ignition switch is in the “ ACC ” or “ ON ” position , the touch panel will activate .
! HOME button s03bs0609
Press ( HOME ) to display the top menu .
! Status bar s03bs060901
The driver profiles icon , outside temperature and clock are shown on the display .
NOTE
. The outside temperature indicator shows the temperature in the area around the sensor . However , the temperature may not be indicated correctly or the update may be delayed in the following conditions . – While parking or driving at low speeds
– When the outside temperature changes suddenly ( example : when going in and out of an underground parking area or when passing through a tunnel )
– When starting the engine after being parked for a certain period of time
|
. You can set the temperature to be displayed in Fahrenheit ( 8F ) or Celsius ( 8C ). For details , refer to “ General settings ” FP214 .
. The clock can be shown in either 12- hour display or 24-hour display . For details about the setting , refer to “ General settings ” FP214 .
. Touch the clock on the status bar to display the clock setting screen . Refer to “ Clock ” FP226 .
! Upper display s03bs060902
For details about items , refer to “ Setting of the upper display ” FP214 .
For details about the following menu , refer to the separate navigation / audio Owner ’ s Manual .
. Radio . Media . Phone . Apps . Add to Shortcut
! Lower display s03bs060903
For details about the setting items , refer to “ Setting of the lower display ” FP217 .
If this screen changes to the climate control screen , refer to “ Dual 7.0-Inch Display Models ” FP263 .
|
! Climate control screen
s03bs060904
|
1 Climate control ON / OFF icon 2 Set temperature indicator ( driver ’ s side ) 3 SYNC mode indicator 4 Airflow mode 5 Climate control mode 6 Air inlet selection 7 Dynamic Ventilation mode indicator 8 Set temperature indicator ( passenger ’ s side )
9 Dynamic Ventilation ON / OFF icon 10 Customizable icon 11 Fan speed control
When operating the climate control system , the main screen switches to the climate control screen . For details about climate control operation , refer to “ Climate Control Panel ” FP262 .
|
3
Instruments and Controls
|
|||
– CONTINUED – |