140
Moonroof
& Moonroof Switches
! Tilting moonroof
1 Up 2 Down s02ak02
s02ak0201
To raise the moonroof , press and hold the switch in the up side and release . To lower the moonroof , press and hold the switch in the down side .
NOTE
Release the switch after the moonroof has been raised or has been lowered completely . Pressing the switch continuously may cause damage to the moonroof .
! Sliding moonroof
1 Open 2 Close s02ak0202
Opening the moonroof :
To open the moonroof using the automatic function , press and hold the open side of the switch and then release it .
To stop the moonroof at a selected midway position while opening it , momentarily press the open or close side of the switch .
The sunshade will also be opened together with the moonroof . The moonroof will stop at a position approximately 0.6 in ( 1.5 cm ) away from the fully opened position .
Press the open side of the switch again to open the moonroof completely .
Closing the moonroof :
To close the moonroof using the automatic function , press and hold the close side of the switch and then release it .
To stop the moonroof at a selected midway position while closing it , momentarily press the open or close side of the switch .
NOTE
. After washing the vehicle or after it rains , wipe away water on the roof prior to opening the moonroof to prevent drops of water from falling into the passenger compartment .
. Driving with the moonroof fully open can cause an annoying sound to be generated at high speeds . If this occurs , use the moonroof at the initial stop position of 0.6 in ( 1.5 cm ) away from the fully opened position .
. For the sake of safety , it is recommended that you avoid driving with the moonroof fully opened .