Function Settings 513
12-4 . Function Settings s12ag
& Function Settings and Adjustments on the Center Information Display s12ag01
Setting adjustments can be manually changed within the center information display to meet your personal requirements . Refer to “ Center Information Display ( CID )” FP188 .
& Individual Settings and Adjustments Excluding Center Information Display s12ag02
For setting adjustments to the following items , refer to the appropriate page for details .
Item |
Function |
Available settings |
Factory default setting |
Page |
Alarm system |
Alarm system |
Operation / Non-operation |
Operation |
135 |
Remote keyless entry system |
Audible signal |
Operation / Non-operation |
Operation |
126 |
& Function Settings and Adjustments Performed by a Dealer s12ag03
Item Function Available settings Factory default setting
Alarm system |
Monitoring start delay time ( after closing doors )
Map lights / Dome light / Cargo area light illumination
|
0 seconds / 30 seconds
ON / OFF
|
30 seconds
OFF
|
Keyless access with push-button |
Audible signal volume * |
Level 1 to 7 |
Level 6 |
Remote keyless entry system |
Audible signal volume * |
Level 1 to 7 |
Level 6 |
Key lock-in prevention |
Key lock-in prevention |
Operation / Non-operation |
Operation |
Auto dimmer cancel
Sensitivity of the operation of the auto dimmer cancel
OFF / Min / Low / Mid / Hi / Max
High beam assist function High beam assist function Operation / Non-operation Operation Reverse gear interlocked rear wiper
Reverse gear interlocked rear wiper operation Operation / Non-operation
Mid
U . S . -spec . models : Non-operation Other models : Operation
Specifications
12
*: The audible signal volume cannot be set under level 5 for the warning chime .