CAUTION |
||||
Never use engine coolant as washer fluid because it could cause paint damage . |
||||
|
Windshield washer fluid warning light
When there is only a small amount of washer fluid remaining , the windshield washer fluid warning light will appear . When this occurs , refill the washer fluid as follows .
|
1 “ FULL ” mark
Remove the washer tank filler cap , then add fluid until it reaches the “ FULL ” mark on the tank .
Use windshield washer fluid . If windshield washer fluid is unavailable use clean
|
If you fill the windshield washer tank with a fluid with a different concentration from the one used previously , purge the old fluid from the piping between the windshield washer tank and washer nozzles by operating the washer for a certain period of time . Otherwise , if the concentration of the fluid remaining in the piping is too low for the outside temperature , it may freeze and block the nozzles .
CAUTION
. Adjust the washer fluid concentration appropriately for the outside temperature . If the concentration is inappropriate , sprayed washer fluid may freeze on the windshield and obstruct your view , and the fluid may freeze in the windshield washer tank .
|
Maintenance and Service
11
|
|
– CONTINUED – |