Towing 439 |
|||||||
Rear tie-down holes : |
plugs . After using the rear tie-down holes , return the plugs to their original places .
WARNING
Use the rear tie-down holes only for downward anchoring . If they are used to anchor the vehicle in any other direction , cables may slip out of the holes , possibly causing a dangerous situation .
& Using a Flat-Bed Truck
s09af02
|
3 . Secure the vehicle onto the carrier properly with safety chains . Each safety chain should be equally tightened and care must be taken not to pull the chains so tightly that the suspension bottoms out .
CAUTION
Transport by flat-bed truck may cause the headlights to become misaligned . In such a case , have the headlight alignment checked by a SUBARU dealer after transporting the vehicle by flat-bed truck .
& Towing with All Wheels on the Ground s09af03
|
In Case of Emergency
9
|
||||
|
1 Rear tie-down hole
The rear tie-down holes are located near each of the jack-up reinforcements .
There is a plug in each rear tie-down hole . To use the rear tie-down holes , remove the
|
This is the best way to transport your vehicle . Use the following procedures to ensure safe transportation .
1 . Shift the select lever into the “ P ” position .
2 . Apply the parking brake firmly .
|
||||||
– CONTINUED – |