430
Flat Tires
NOTE
. Make sure that the jack is well lubricated before using it .
. To take out the tools and spare tire , store the cargo area cover to the original position and open the under-floor storage . Refer to “ Maintenance Tools ” FP428 .
7 . Loosen the wheel nuts using the wheel nut wrench but do not remove the nuts .
9 . Turn the jackscrew by hand until the jack head engages firmly into the jackup point .
6 . Take out the under-floor storage compartment and turn the attaching bolt counterclockwise , then take the spare tire out .
NOTE
Carefully read “ Temporary Spare Tire ” FP426 and strictly follow the instructions .
8 . Place the jack under the side sill at the front or rear jack-up point closest to the flat tire .
10 . Insert the jack handle into the jackscrew , and turn the handle until the tire clears the ground . Do not raise the