|
2 . Make sure the parking brake is applied .
3 . Make sure the select lever is in the “ P ” position . The engine can also start when the select lever is in the “ N ” position , however , for safety reasons , start in the “ P ” position .
4 . Depress the brake pedal until the operation indicator on the push-button ignition switch turns green . When starting with the select lever in the “ N ” position , the indicator does not turn green .
5 . While depressing the brake pedal , press the push-button ignition switch .
NOTE
While pressing the select lever button in , the indicator on the push-button ignition switch will not turn green even when the select lever is in the “ P ” position .
& Stopping Engine s07be04
1 . Stop the vehicle completely .
2 . Move the select lever to the “ P ” position .
3 . Press the push-button ignition switch . The engine will stop , and the power will be switched off .
|
WARNING
. Do not touch the push-button ignition switch during driving .
When the push-button ignition switch is operated as follows , the engine will stop .
– The switch is pressed and held for 3 seconds or longer .
– The switch is pressed briefly 3 times or more in succession .
The power steering system will not operate either . A greater force will be required to steer , and it may result in an accident .
. If the engine stops during driving , do not operate the push-button ignition switch or open any of the doors until the vehicle is stopped in a safe location . It is dangerous because the steering lock may be activated . Stop the vehicle in a safe place , and contact a SUBARU dealer immediately .
|
CAUTION
. Do not stop the engine while the select lever is in a position other than the “ P ” position .
. If the engine is stopped while the select lever is in a position other than the “ P ” position , the power will be in “ ACC ”. If the vehicle is left in this condition , the battery may be discharged .
NOTE
. If you press the push-button ignition switch while driving , the emergency engine stop interrupt screen alerts the driver by messages on the combination meter display ( color LCD ) and beeps .
– CONTINUED –
|
7
Starting and Operating
|