290
USB Power Supply
. If a device is connected for a long time when the engine is not running , doing so may cause the risk of a discharged battery . Even when the engine is running , we recommend that you do not connect a device for an unnecessarily long time .
. Do not connect a malfunctioning device . Doing so may cause the risk of smoke and fire .
NOTE
. The rated voltage of each USB terminal is 5 V . For details about the maximum rated power , refer to “ How to Use the USB Power Supply ” FP290 . Before connecting a device , be sure to read the instruction manual of the device and check whether or not this specification of the output is supported by the device . If a device that requires power exceeding the maximum rating is connected , power supply or charging may not be possible . Even if charging could be completed , the time required for charging may be longer than when the genuine charger for that device is used .
. Depending on the device , charging may be possible only when a special cable is used . In this case , be sure to connect the device using the special cable .
. When a device that communicates with a PC is connected , power supply or charging may not be possible .
. When connect a device for charging , disconnect the device promptly after charging is completed .
& How to Use the USB Power Supply s06ay01
Type-A and Type-C
Type-A Front seat USB power supply ( an audio device can be connected and used )
– USB Type-A : DC 5 V / 2.4 A * – USB Type-C : DC 5 V / 3.0 A *
*: The available electrical power of the two USB terminals is a maximum of 5.4 A .