Pre-Collision Braking System
Activation of Pre-Collision Braking System when turning
• The Pre-Collision Braking System recognizes oncoming vehicles , pedestrians , oncoming cyclists or motorcycles as identified objects when you are making a turn . The system is intended to avoid or reduce the severity of collisions with oncoming vehicles that are approaching in the neighboring oncoming lane , but the vehicle
H00969 may not be able to stop or the system may not activate under certain conditions *.
• If your vehicle is moving faster than approximately 16 mph ( 25 km / h ) when you turn , the system will not activate . Also , even if your vehicle is moving approximately 16 mph ( 25 km / h ) or slower , if the obstacle suddenly cuts in front of you or is outside the camera ’ s field of view , your vehicle may not stop or the system may not activate depending on various conditions * such as visibility or the slipperiness of the road .
*: Conditions
- Speed difference with the identified object , distance to the identified object , the angle of approach , changes in the actions of the identifiable object and the position of the identifiable object relative to the side of your vehicle . - Vehicle conditions ( amount of load , number of occupants , etc .) - Road conditions ( grade , slipperiness , shape , bumps , etc .) - Visibility ahead is poor ( rain , snow , fog or smoke , etc .). - The obstacle is something other than an identifiable object .
• A parked vehicle or a vehicle that is traveling in the same direction as your vehicle
• An animal , etc .
• A guardrail , telephone pole , tree , fence or wall , etc . - Even if an identified object has been detected , you are not signaling to move in the direction that your vehicle is actually traveling . - Even if the object is an identifiable object , it is traveling close to objects on the side of the road . - Even if the object is an identifiable object , it is stopped or traveling in your lane .
Continued on next page �
35