Starting and operating / Cruise control 7-55
accelerator pedal to accelerate the vehicle . When the accelerator pedal is released , the vehicle will return to and maintain the previous cruising speed .
& To temporarily cancel the cruise control
S07AQ02
The cruise control can be temporarily canceled in the following ways .
WARNING
For CVT models , you can cancel the cruise control by shifting the select lever into the “ N ” position . However , do not shift the lever into the “ N ” position while driving except in case of emergency . If the select lever is shifted into the “ N ” position , the engine brake will no longer work . This could result in an accident .
The cruise control set indicator light in the combination meter turns off when the cruise control is canceled . switch to the “ RES ” side to return to the original cruising speed automatically .
The cruise control set indicator light in the combination meter will automatically illuminate at this time .
& To turn off the cruise control
S07AQ03
There are two ways to turn off the cruise control :
. Press the cruise control main button again .
. Turn the ignition switch to the “ ACC ” or “ LOCK ”/“ OFF ” position ( but only when the vehicle is completely stopped ).
& To change the cruising speed
S07AQ04
! To increase the speed ( by the “ RES / SET ” switch )
S07AQ0405
. Press the “ CANCEL ” button .
. Press the X-MODE switch to activate the X-MODE ( models with X-MODE ).
. Depress the brake pedal .
. Depress the clutch pedal ( MT models only ).
To resume the cruise control after it has been temporarily canceled and with vehicle speed of approximately 20 mph ( 30 km / h ) or more , press the “ RES / SET ”
– CONTINUED –