7-52
Starting and operating / Hill start assist system
place the ignition switch in the “ LOCK ”/ “ OFF ” position once and then start over again .
! To deactivate
S07AU0201
1 . Park your vehicle in a flat and safe location and apply the parking brake .
2 . Turn the ignition switch to the “ LOCK ”/ “ OFF ” position .
3 . Restart the engine .
4 . Confirm the following items . ( 1 ) The brake system warning light illuminates . ( 2 ) The Vehicle Dynamics Control warning light turns off . ( 3 ) The Vehicle Dynamics Control OFF indicator light turns off . ( 4 ) The ABS warning light turns off .
5 . Press and hold the Vehicle Dynamics Control OFF switch for 30 seconds until the Vehicle Dynamics Control OFF indicator light on the combination meter turns on and off .
6 . Within 5 seconds , release the Vehicle Dynamics Control OFF switch .
7 . Within 2 seconds , press back the Vehicle Dynamics Control OFF switch .
The Hill start assist OFF indicator light turns on and off .
8 . Turn the ignition switch to the “ LOCK ”/ “ OFF ” position . Hill start assist is deactivated .
NOTE
When the Hill start assist system is deactivated , the Hill start assist OFF indicator light illuminates . ! To reactivate
S07AU0202
To reactivate Hill start assist system , repeat steps 1 to 8 . When the Hill start assist system is activated , the Hill start assist OFF indicator light turns off .
& Hill start assist warning light / Hill start assist OFF indicator light
S07AU01
Refer to “ Hill start assist warning light / Hill start assist OFF indicator light ” F3-22 .