Starting and operating / Vehicle Dynamics Control system 7-41
. Traction Control Function
The traction control function is designed to prevent spinning of the driving wheels on slippery road surfaces , thereby helping to maintain traction and directional control . Activation of this function is shown by flashing the Vehicle Dynamics Control operation indicator light .
. Skid Suppression Function
The skid suppression function is designed to help maintain directional stability by suppressing the wheels ’ tendency to slide sideways during steering operations . Activation of this function is shown by flashing the Vehicle Dynamics Control operation indicator light .
NOTE
. The Vehicle Dynamics Control system may be considered normal when the following conditions occur . – Slight twitching of the brake pedal is felt . – The vehicle or steering wheel shakes to a small degree . – An operating sound from the engine compartment is heard briefly when starting the engine and when driving off after starting the engine . – The brake pedal seems to jolt when driving off after starting the engine . . In the circumstances shown in the following list , the vehicle may be less stable than it feels to the driver . The Vehicle Dynamics Control System may therefore operate . Such operation does not indicate a system malfunction . – On gravel-covered or rutted roads – On unfinished roads – When the vehicle is towing a trailer – When the vehicle is fitted with snow tires or winter tires . Activation of the Vehicle Dynamics Control system will cause operation of the steering wheel to feel slightly different compared to that for normal conditions . . It is always important to reduce speed when approaching a corner , even if your vehicle is equipped with the Vehicle Dynamics Control system . . Always turn off the engine before replacing a tire . Failure to do so may render the Vehicle Dynamics Control system unable to operate correctly .
& Vehicle Dynamics Control system monitor
S07AN01
Refer to “ Vehicle Dynamics Control warning light / Vehicle Dynamics Control operation indicator light ” F3-23 and “ Vehicle Dynamics Control OFF indicator light ” F3- 24 .
& Vehicle Dynamics Control OFF switch
S07AN02
Press the Vehicle Dynamics Control OFF switch to deactivate the Vehicle Dynamics Control system . Creating adequate driving wheel slip by deactivating the Vehicle Dynamics Control system may help to recover from the loss of traction . Use the Vehicle Dynamics Control OFF switch as necessary .
– CONTINUED –