7-14
Starting and operating / Starting and stopping engine ( models with push-button start system )
1 ) Operation indicator 2 ) Push-button ignition switch
When the push-button ignition switch is pressed while depressing the clutch pedal ( MT models ) or the brake pedal ( CVT models ), the engine will start . The starting procedure for the engine is as follows .
! MT models
S07BE0301
1 . Carry the access key fob , and sit in the driver ’ s seat .
2 . Apply the parking brake . 3 . Shift the shift lever to neutral . 4 . Depress the brake pedal .
5 . Depress the clutch pedal until the indicator on the push-button ignition switch turns green .
6 . While depressing the clutch pedal , press the push-button ignition switch .
NOTE
In case the engine does not start by the normal engine start procedure , move the shift lever to the neutral position , and switch the power to “ ACC ”. Depress the clutch pedal , and press the push-button ignition switch for at least 15 seconds . The engine may start . Only use this engine start procedure in case of emergency .
! CVT models
S07BE0304
1 . Carry the access key fob , and sit in the driver ’ s seat .
2 . Apply the parking brake .
3 . Shift the select lever into the “ P ” position . The engine can also start when the select lever is in the “ N ” position , however , for safety reasons , start in the “ P ” position .
4 . Depress the brake pedal until the operation indicator on the push-button ignition switch turns green . When starting with the select lever in the “ N ” position , the indicator does not turn green .
5 . While depressing the brake pedal , press the push-button ignition switch .
NOTE
. While pressing the select lever button in , the indicator on the push-button ignition switch will not turn green even when the select lever is in the “ P ” position . . In case the engine does not start by the normal engine start procedure , move the select lever to the “ P ” position , and switch the power to “ ACC ”. Depress the brake pedal , and press the push-button ignition switch for at least 15 seconds . The engine may start . Only use this engine start procedure in case of emergency . . When the engine is not started , the brake pedal may feel stiff . In such a case , depress the brake pedal more forcefully than usual . Check that the operation indicator on the push-button ignition switch turns green , and press the push-button ignition switch to start the engine .
& Stopping engine
S07BE04
1 . Stop the vehicle completely .
2 . Move the select lever to the “ P ” position ( CVT models ).
3 . Press the push-button ignition switch . The engine will stop , and the power will be switched off .