7-12
Starting and operating / Starting and stopping engine ( models with push-button start system )
ing and braking more difficult . It could also result in accidental activation of the “ LOCK ”/“ OFF ” position on the ignition switch , causing the steering wheel to lock .
& Steering lock
S07BD07
After stopping the engine and the key is removed from ignition switch , the steering wheel will be locked due to the steering lock function .
When the engine is restarted , the steering lock will be automatically released .
! When the steering lock cannot be released
S07BD0701
When you cannot unlock the steering wheel , perform the following steps .
1 . Check that the parking brake is applied .
2 . Turn off unnecessary lights and accessories .
3 . Check that the select lever is set in the “ P ” position .
4 . Depress the brake pedal and keep it depressed .
5 . Turn the ignition switch to the “ ON ” position while turning the steering wheel left and right .
If you cannot unlock the steering wheel by doing the steps , contact your nearest SUBARU dealer .
Starting and stopping engine ( models with push-button start system )
& Safety precautions
Refer to “ Safety precautions ” F2-3 .
S07BE
S07BE06
& Operating range for pushbutton start system
S07BE01
Refer to “ Operating range for push-button start system ” F3-6 .
& Starting engine WARNING
S07BE03
. There are some general precautions when starting the engine . Carefully read the precautions described in “ Starting engine ” F7-10 .
. If the indicator on the push-button ignition switch flashes in green after the engine has started , never drive the vehicle . The steering is still locked , and it may result in an accident .