Interior equipment / Front View Monitor 6-19
. Under an artificial light such as a fluorescent lamp , sodium-vapor lamp or mercury lamp , the lighted portion may look like it is flickering ( flicker phenomenon ). . While the display has cooled down , the image may leave traces or become darker than usual , causing a difficulty in viewing the screen . Always check the traffic around the vehicle directly with your eyes while driving the vehicle . . The following incidents should not be deemed a malfunction . – The camera lens may become foggy when the humidity is high on a rainy day . – The light from a vehicle or building located ahead may be reflected towards the camera image while driving at night . – In a dark place or while driving at night , the camera image may be adjusted to make noises less visible . Therefore , the image may look like a monochromatic image or the image colors may differ from the actual colors . The camera image may be deteriorated in regard to sharpness at the center and four corners of the screen . This is not a malfunction .
& Guiding line
1 ) |
Guiding line |
2 ) |
Warning message |
S06BA04
The guiding line that indicates the width and the front end of your vehicle is displayed on the display .
& Handling of camera CAUTION
S06BA05
Observe the following instructions . Otherwise , the system may malfunction .
. Do not apply any strong impact to the camera such as banging it or hitting it with an object . The mounting angle may change .
. The camera unit is a waterproof structure . Do not attempt to remove , disassemble or modify the unit .
. Do not rub strongly or polish the camera lens with a hard brush or abrasive compounds . The lens may be scratched resulting in an adverse effect to the camera image .
. The camera lens is made of glass or plastic . Do not allow any organic solvent , body wax , oil film remover or glass coating agent to become attached on the lens surface . If any becomes attached , remove it immediately .
. Do not expose the camera lens to any sudden temperature change , for example , spraying hot water on it in cold weather .
. Do not apply the water jet of a high pressure washer to the camera or the surrounding area when cleaning the vehicle . The impact by the strong water pressure may cause the camera to come off . Also , water may enter inside the camera and cause a malfunction .
. If the camera is exposed to any impact , it may lead to malfunction
– CONTINUED –