Interior equipment / Front View Monitor 6-17 accident may occur . When driving the vehicle , always check the traffic around the vehicle directly with your eyes and the mirrors .
. Always operate the vehicle as you would without the Front View Monitor .
. Do not use the Front View Monitor in the following situations .
– You are driving on a dirt road or a road covered in snow .
– The camera malfunctions ( e . g . the lens or bracket is broken ).
. If the outside temperature is low , the monitor screen may become dark or the image may become dim . In particular , the image of a moving object may be distorted or disappear from the screen . You must always check the traffic around the vehicle directly with your eyes when driving it .
& How to access the Front View Monitor
S06BA01
1 ) VIEW monitor switch
To change over to the camera screen , perform either of the following operations when the ignition switch is in the “ ACC ” or “ ON ” position .
. Press the VIEW monitor switch .
. Shift the select lever to the “ R ” position , and then shift into the other position except the “ P ” position when the reverse interlock function is on .* 1
* 1 : The reverse interlock function can be switched on or off . Refer to “ Camera shift link setting ” F3-63 .
& How to cancel the Front View Monitor
S06BA02
! Manual cancellation
S06BA0201
. Press the VIEW monitor switch again .
. Press the INFO button on the steering wheel .
! Automatic cancellation
S06BA0202
If any of the following conditions are met , the Front View Monitor is canceled automatically .
After accessing the Front View Monitor by pressing the VIEW monitor switch :
. Approximately 3 minutes have passed since the last operation .
. The vehicle speed becomes 12.5 mph ( 20 km / h ) or more .*
. The select lever is shifted to the “ P ” position .
. The parking brake is applied .
*: The Front View Monitor can be activated when pressing the VIEW monitor switch , regardless of the vehicle speed .
After accessing the Front View Monitor using the select lever :
. Shift the select lever into the “ P ” position .
. The vehicle speed becomes 5 mph ( 8 km / h ) or more .*
– CONTINUED –