6-10
Interior equipment / USB power supply
. If a device is connected for a long time when the engine is not running , the battery may be discharged . Even when the engine is running , we recommend that you do not connect a device for an unnecessarily long time .
. Do not connect a malfunctioning device . Doing so may cause the risk of smoke and fire .
NOTE
. The USB power supply is designed to supply a maximum rated power of DC 5 V / 2.1 A or DC 5 V / 1 A . Before connecting a device , be sure to read the instruction manual of the device and check whether or not this specification of the output is supported by the device . If a device that requires power exceeding the maximum rating is connected , power supply or charging may not be possible . Even if charging could be completed , the time required for charging may be longer than when the genuine charger for that device is used . . Depending on the device , charging may be possible only when a special cable is used . In this case , be sure to connect the device using the special cable .
. When a device that communicates with a PC is connected , power supply or charging may not be possible . . When connect a device for charging , disconnect the device promptly after charging is completed .
& How to use the USB power supply
S06AY01
Use the USB terminal to use or charge an electronic device . When the ignition switch is in the “ ACC ” or “ ON ” position , the power can be supplied to the electronic device . Up to DC 5 V can be supplied from each to terminal .
Front seat 1 terminal type USB power supply
– DC 5 V / 1 A
– Audio devices can be connected and used .