3-86
Instruments and controls / Mirrors
1 ) “ Learn ” button
5 . At the garage door opener motor , ( security gate motor , etc .) locate the “ Learn ”, “ Smart ”, or “ Program ” button . This can usually be found where the hanging antenna wire is attached to the motor-head unit ( see the device ’ s manual to identify this button ). The name and color of the button may vary by manufacturer .
NOTE
A ladder and / or second person may simplify the following steps .
6 . Firmly press and release the “ Learn ”, “ Smart ”, or “ Program ” button . You now have 30 seconds in which to complete step 7 .
7 . Return to the vehicle and firmly press , hold for two seconds and release the HomeLink button up to three times . At this point programming is complete and your device should operate when the HomeLink button is pressed and released .
1 ) Status Indicators
8 . If status indicator arrows appear next to the indicator light , please refer to “ Garage Door Two-Way Communication ” F3-87 .
In the event that there are still programming difficulties or questions , additional HomeLink information and programming videos can be found at www . HomeLink . com and www . youtube . com / HomeLinkGentex . For Genie and Sommer garage door openers please go directly to the HomeLink website .